Products
Products
We offer a wide range of cables used by the Power sector, Railways, Petrochemical, Fertilizer & Steel plants and other Commercial & Industrial Projects. The range covers 1.1 KV LT Power Cables (PVC & XLPE), Control Cables, Instrumentation Cables, Thermocouple Compensating and Extension cables, Railway Signaling Cables, Railway U/G Quad Cables, Railway Unscreened PVC Power Cables etc. These cables can be supplied with HR (Heat Resistant), FR (Fire Resistant), FRLS (Flame Retardant Low Smoke), Low Halogen and FS (Fire survival) characteristics as required by the customers.
| Sr. No. | IS | Discription of IS | Product Range |
| 1 | IS : 694/2010 | SINGLE CORE UPTO & INCLUDING 1000 SQMM AND MULTI CORE UPTO 400 SQMM PVC INSULATED UNSHEATHED & SHEATHED CABLES/CORDS WITH RIGID AND FLEXIBLE CONDUCTOR FOR RATED VOLTAGE UPTO &INCLUDING 450/750V ACCOORDING TO IS: 694/2010 | SINGLE CORE UPTO & INCLUDING 630 SQMM AND MULTI CORE UPTO 50 SQMM |
| 2 | IS : 1554 (Part-I)1988 | PVC INSULATED (HEAVY DUTY) ELECTRIC CABLES (FOR WORKING VOLTAGE UPTO &INCLUDING 1100 V ACCORDING TO IS: 1554 (Part I)1988 | SINGLE CORE UPTO & INCLUDING 1000 SQMM AND MULTI CORE UPTO 400 SQMM |
| 3 | IS : 7098 (Part-I)1988 | XLPE INSULATED CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 1100 VOLTS ACCORDING TO IS:7098 (Part I) 1988 | SINGLE CORE UPTO & INCLUDING 1000 SQMM AND MULTI CORE UPTO 400 SQMM |
| 4 | IS : 14255/1995 | AERIAL BUNCHED CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 1100 VOLTS SPECIFICATION ACCORDING TO IS: 14255/1995 (Part-I) | SINGLE CORE & MULTI CORE UPTO AND INCLUDING 95 SQMM |
| 5 | IRS : S-63/2014 | PVC INSULATED ARMOURED UNSCREENED, UNDERGROUND RAILWAY SIGNALLING CABLE COPPER CONDUCTOR CONFIRMING TO SPEC NO. IRS : S - 63/2014 WITH AMD – 4 | 2 CORE X 2.5 SQMM & UPTO AND INCLUDING 37CORE X1.5 SQMM |
|
LIST OF MACHINERY |
||||
|
Sr. No. |
Machinery Name |
Make |
Capacity |
Qty |
|
1 |
RBD M/c |
Aggarwal Plastic M/C |
3 Ton/8 Hrs |
3 Nos |
|
2 |
Pipe M/c |
Aggarwal Plastic M/C |
|
1 Nos |
|
3 |
Servo Stabilizer |
Servokon |
250 KVA |
1 Nos |
|
4 |
But Welder |
Power Tech Engg. |
|
2 Nos |
|
5, |
Extruder 65mm |
New Sony Electrical |
45 Kms/8 Hrs |
1 Nos |
|
6 |
Extruder 45mm |
Aggarwal Plastic M/C |
30 Kms/8 Hrs |
1 Nos |
|
7 |
Extruder 75mm |
Aggarwal Plastic M/C |
1 Km/1.5 Hrs |
1 Nos |
|
8 |
Extruder 120mm |
Aggarwal Plastic M/C |
1 Km/1.5 Hrs |
1 Nos |
|
9 |
Extruder Compounding M/c |
Aggarwal Plastic M/C |
|
1 Nos |
|
10 |
Laying M/c 18 Bobbin |
Pragati R.K Engg |
1 Km/2.5 Hrs |
1 Nos |
|
11 |
Laying M/c 36 Bobbin |
Pragati R.K Engg |
1 Km/3 Hrs |
1 Nos |
|
12 |
DST M/c |
Pragati R.K Engg |
1 Km/2.5 Hrs |
3 Nos |
|
13 |
Rewinding Set up |
Indigenous |
|
1 Nos |
|
14 |
Compressor 7.5 H.P |
Neelgiri |
7.5 H.P |
2 Nos |
|
15 |
Spark Tester |
Shantu Engg. |
|
4 Nos |
|
16 |
Core rewinding head |
Power Tech Engg. |
|
2 Nos |
|
17 |
Bunching M/C |
Indigenous |
|
1 Nos |
|
18 |
PVC Cutter |
Indigenous |
|
1 Nos |
|
19 |
Armoring cum Laying M/c |
Aggarwal Plastic M/C |
|
1 Nos |
|
20 |
Drum Twister |
Indigenous |
|
1 Nos |
|
21 |
Heating Pot |
Indigenous |
|
1 Nos |
|
22 |
Wrapping M/c |
Indigenous |
|
8 Nos |
|
23 |
Electronic Hoist |
Vaishno Engg. |
5 & 3 Ton |
2 Nos |
|
24 |
Lath M/C |
Batala |
|
1 Nos |
|
25 |
Drill M/C |
Indigenous |
|
1 Nos |
|
26 |
Grinding M/c |
Indigenous |
|
1 Nos |
|
27 |
Mixture |
Aggarwal Plastic M/C |
|
2 Nos |
|
28 |
Welding M/c |
C-Max |
35-450 Amp |
1 Nos |
|
29 |
D.G Set |
Sudhir Silent |
250 KVA |
1 Nos |
|
30 |
UPS |
Hitachi |
100 KVA |
1 Nos |
|
31 |
Resistance Annealer Unit |
Dayal & Sons Engineering Works |
15 Km/Hrs |
1 Nos |
|
ID No. |
Name of Test Equipment |
Make |
Range |
Least Count / Accuracy |
|
01. |
Digital Tensile Testing Machine |
a) Bagga
b) Bagga
|
0-250 K g f 0 – 5000 Kgf |
100 Gm 1 Kg. |
|
02. |
High Voltage AC Tester |
a) Sai Scientific b) Shantnu |
Upto 10 KV Upto 10 KV |
200 V ---- |
|
03. |
High Voltage DC Tester |
I.E |
Upto 3 KV |
0.025 KV |
|
04. |
Spark Tester |
a) Shonto Elect b) Shonto Elect c) Shantnu d) Shantnu |
Upto 15 KV Upto 15 KV Upto 15 KV Upto 15 KV |
300 Volt 300 Volt ---- ---- |
|
05. |
Double Kelvin Bridge |
Maxwell |
0.2 micro ohm to 11 ohm |
±0.05% & ±1 slide wire Division |
|
06. |
CR Meter |
Agronic |
19.99 Kohms |
0.005 ohms |
|
07. |
Aging Oven Multi (Four) Cell |
Vekster |
Upto 300oC |
± 2oC |
|
08. |
Heating Oven |
S.T |
Upto 300oC |
± 2oC |
|
09. |
Million Meg. Ohm Box |
a) Sigma b) Sivananda |
Upto 100x105 M- ohm |
0.02 M-ohm |
|
10. |
Thermal Stability Test Equipment |
Scientific Trader |
Upto 300oC |
± 0.1o C |
|
11. |
Electronic Balance |
Japan |
Upto 200 gm |
0.001 mg |
|
12. |
Hot Set Test Equipment |
H.S. Elects. Delhi |
Two Samples Testing at a time arrangement |
0.1 mm |
|
13. |
Air Compressor |
Super Gant |
Upto 300 lbs |
-------- |
|
14. |
Water Absorption Test Equip. |
H.S. Elects. |
--------- |
|
|
15. |
Hot Deformation Test Equip. with Frame and Weights |
RANJANA ENGG. WORKS |
0.70 mm |
-------- 1 gm. |
|
16. |
Flammability Test Equipment Conventional Bunsen Burner |
RANJANA ENGG. WORKS |
1190 x 300 x 440 mm 10 mm Bore |
-------- -------- |
|
17. |
Conditional Chamber with Deep Freezer |
S.D. SCIENTI FIC Co. Delhi |
-20 to 100o C |
0.1o C |
|
18. |
Mandrels |
Local (Under Use) |
6mm to 47mm |
-------- |
|
19. |
Traveling Microscope |
---- |
22x |
0.01mm |
|
20. |
Digital Varnier Caliper |
Mitutoyo |
Upto 150 mm |
0.01 mm |
|
21. |
Digital Micrometer |
a) Agronic b) Mitutoyo c) Mitutoyo d) Mitutoyo e) IE |
19.99 Kohms 0-25mm 0-25mm 0-25mm 19.99 Kohms |
0.005 Kohms 0.001 mm. 0.001 mm. 0.001 mm. 0.005 Kohms |
|
22. |
Dumbbell Punching Machine with Die |
----- |
Standard Dumbbell |
--------- |
|
23. |
Scale 1 Meter |
Kristeel Shinwa |
Upto 1 meter |
0.5 mm |
|
24. |
Vacuum |
H.S. Elect. |
Upto 30 |
0.5 |
|
25. |
Water Bath with Heating Arrangement |
R.K electrical
|
1120 x 600 x 620 mm
|
Upto 100oC/+ 1oC |
|
26. |
Cold Impact Test Apparatus |
NSW |
------- |
-------- |
|
27. |
Stop Watch |
Casio |
|
1/100 Sec. |
|
28. |
Melt Flow Index Test Apparatus |
Scientific Traders |
Upto 250oC |
0.1oC |
|
29. |
Vicat Softening Point Apparatus |
Scientific Traders |
Upto 25mm |
0.01 mm |
|
30. |
Environmental Stress Cracking Test Apparatus |
Scientific Traders |
200mm Long & 32mm Diameter Glass Test Tube |
|
|
31. |
Thermometer |
Zeal Zeal Zeal Oxford |
Upto 110oC Upto 150oC Upto 300oC -30-50 oC |
1oC 1oC 1oC 1oC
|
|
32. |
Standard Resistance Box |
Sigma |
10 ohm to 1000 ohm |
1% to 5% |
|
33. |
Radius Guages |
TTM |
7.5 mm to 15 mm |
-------- |
|
34. |
AC Kilo Volt Meter |
Sigma |
Upto 10 KV |
0.1 KV |
LT Power Cables
The LT Power Cables are used in electrical transmission in industrial units, panel board wiring, control systems and communication panel systems. These are impervious to water, oil and gas, and possess enhanced functional life thus providing resistance against abrasion, vibration and aging. These wires are flame retardant and does not support combustion.
Instrumentation Cables
Instrumentation Cables have Very Diverse applicationsn, these cables are designed for use in communication and instrumentation applications in and around process industries like oil exploration, cement, paper, steel, power generation and others.
Control Cables
Control Cable is a flexible instrumentation cable designed for measuring, control or regulation in the field of process automation. It is a highly flexible multicore cable, with (class 5) copper conductors and a galvanised steel wire braid (GSWB) for mechanical protection.
Flexible Cables
Flexible cables, or 'continuous-flex' cables, are cables specially designed to cope with the tight bending radii and physical stress associated with moving applications, such as inside cable carriers.